3D ONE Hybrid Compound & Finishing Polish

Key Features

✔ Compound & Polish in One Step – Cuts and finishes paint using a single product
✔ Nano Ceramic Alumina Abrasives – Corrects heavy to light scratches efficiently
✔ Removes Up to P1500 Sanding Marks – Strong cutting ability for serious paint defects
✔ High Gloss Finishing Capability – Leaves paint smooth with a brilliant showroom shine
✔ Water-Based Professional Formula – Easy to use, easy cleanup, and safe for detailing environments

3D ONE Hybrid Compound & Finishing Polish

3D ONE is a hybrid cutting compound and finishing polish designed to simplify paint correction by combining two steps into one product. Using advanced Nano Ceramic Alumina abrasives, it removes scratches, swirl marks, and sanding marks while delivering a high-gloss finish.

This versatile formula allows detailers to perform both heavy correction and final polishing using the same compound simply by changing the polishing pad.

Advanced Nano Abrasive Technology

3D ONE uses Nano Ceramic Alumina abrasives that provide strong cutting power while refining the paint surface during polishing.

This technology allows the product to effectively remove:

• Heavy scratches
• Swirl marks
• Oxidation
• Sanding marks up to P1500 grit

The abrasives break down during polishing to produce a smooth, glossy finish.

Two-Step Results with One Product

Depending on the pad used, 3D ONE can perform different stages of paint correction:

• Cutting pad or wool pad – Removes deeper scratches and sanding marks
• Polishing or finishing pad – Refines the paint and produces high gloss

This flexibility makes it ideal for both professional detailers and enthusiasts.

Easy to Use and Clean

The water-based formula spreads easily, wipes off cleanly, and produces minimal dust during polishing. It works well with both dual-action polishers and rotary machines.

For best results, polish in shaded areas, although the formula is also sun-friendly.

Directions for Use

1. Shake the bottle well before use.

2. Apply 4–5 dime-sized drops onto a cutting pad or wool pad.

3. Polish a 2' × 2' section using slow overlapping passes.

4. After defects are removed, switch to a finishing pad with 4–5 drops.

5. Continue polishing until swirl marks and holograms are removed.

6. Wipe residue with a clean microfiber towel to reveal a high-gloss finish.

Ideal For

• Paint correction and scratch removal
• Removing sanding marks up to P1500 grit
• One-step paint correction jobs
• Professional automotive detailing
• Achieving showroom-quality paint finish